This paper presents an efficient chamfering method for cylindrical gears using rotational indexing machining. By combining kinematic analysis with cutting-edge […]
In mechanical transmission systems, helical gears are widely used due to their smooth operation and high load capacity. However, issues
Abstract: Honing has emerged as a pivotal method for gear finishing. Delving into gear honing mechanism and accurately grasping the
Hypoid gears are widely used in various industrial applications, including industrial robots, automotive systems, and aerospace, due to their high
Helical gears are widely used in mechanical transmission systems due to their smooth operation and high load capacity. The time-varying
Abstract: As a special equipment for machining spiral bevel gears, the spiral bevel gear milling machine is prone to jamming issues
In this study, I investigate the meshing characteristics of spiral bevel gears under various installation errors, focusing on the deviations
In gear transmission systems, time-varying meshing stiffness (TVMS) is a critical parameter influencing dynamic performance, vibration characteristics, and fault diagnosis
Friction-induced noise in worm gear mechanisms remains a critical challenge for Electric Power Steering (EPS) systems. This article systematically analyzes
Equal-height spiral bevel gears demonstrate superior performance characteristics including high transmission efficiency, strong load-bearing capacity, smooth operation, and minimal noise
Abstract This paper presents a comprehensive simulation analysis of the cutting force and temperature in gear hobbing process of cycloid
The contact characteristics of spiral bevel gears critically influence their transmission efficiency, load capacity, and operational stability. This study investigates
This study investigates power loss mechanisms in helical gear transmissions for pure electric vehicle reducers using Amesim simulation software. A
In modern mechanical transmission systems, helical gears play a critical role due to their ability to provide smooth and efficient
In recent years, the rapid development of new energy vehicles and intense competition in the automotive industry have heightened demands
In recent years, the rapid development of robotics and mechatronics has imposed higher demands on gear transmission systems, particularly those
In hydraulic power steering systems for commercial vehicles, steering shaft gears play a critical role in torque transmission, demanding high
Abstract: The modeling and simulation of helical offset non-orthogonal face gears, aiming to promote their application in various spatial layouts
In the field of offshore wind power, the reliability and efficiency of gear transmission systems are paramount. Helical gears are
This paper presents a comprehensive mathematical framework for hypoid gear generation using the Spiroflex method on 6-axis CNC gear cutting
Abstract The intricacies of gear shaving, a precision finishing method employed prior to the final heat treatment of gears. It
In the field of mechanical transmission, bevel gears play a critical role in transferring motion and power between intersecting shafts.
To enhance the machinability of transmission gears and stabilize final heat treatment deformation, our company commissioned a continuous pusher-type isothermal
Abstract Gear shaving is a widely applied precision finishing method for gear surfaces, significantly enhancing surface quality. This paper delves
Heavy-duty carburized gears are critical components in industrial machinery, particularly in automotive final drives where they transmit high torque under
This paper presents a comprehensive methodology for designing heavy-duty cylindrical gear reducers through digital parametric approaches and structural optimization. The
This study proposes a numerical simulation and parameter optimization method for warm rolling of spiral bevel gear pinions to address
Vibration and noise control in spur gear transmission systems remains critical for improving mechanical efficiency and operational longevity. This study
Abstract: In order to promote the application of face gears in various spatial layout transmission occasions and expand their application
This study investigates the contact force distribution and stress evolution during helical gear meshing using finite element methods. A comprehensive
Worm gear reducers are critical components in low-speed, high-torque industrial applications. Their unique design, featuring a worm (screw-like gear) meshing
The extrusion forming process of cylindrical gears significantly improves production efficiency and mechanical strength compared to traditional machining methods. This
In gear technology, manufacturing shafts with large length-diameter ratios presents unique challenges due to deflection, vibration, and precision requirements. Through
Automotive gears are critical transmission components responsible for directional changes, speed variation, and power transfer in vehicles. Compared to belts
Abstract The common principles of axial gear shaving, the structure of gear shaving machines, and the crowned gear mechanism. It
Introduction In various fields such as automobiles, machinery, and aerospace, gear shafts are an integral component of many manufacturing equipment.
Cumulative pitch errors significantly influence the dynamic behavior and wear characteristics of cylindrical gear systems. This study establishes a comprehensive
The development of compact, high-efficiency transmission systems is critical for enhancing electric vehicle performance and energy economy. This research presents
In high-precision machining of spiral bevel gears, backlash in transmission systems remains a critical challenge. This study proposes a dual-motor
This study investigates the meshing performance of hypoid gears manufactured using the duplex helical method through numerical analysis and experimental
Abstract:This article mainly introduces the design and verification analysis process of the gear milling process for aerospace transmission spiral bevel
This paper presents a comprehensive error correction framework for laser-based measurement systems applied to involute spur gear inspection. Building upon
Abstract:As a special equipment for machining spiral bevel gears, the spiral bevel gear milling machine is prone to jamming issues
Spiral bevel gears serve as critical transmission components for transferring motion and power between intersecting or staggered shafts. Compared to
This study presents a comprehensive analysis of helical gear systems considering tooth profile and lead crowning modifications. A nonlinear coupling
In modern mechanical systems, spiral bevel gears play a critical role in transmitting power between intersecting shafts. However, structural reliability
1. Introduction Spur gear is fundamental components in mechanical transmission systems, widely used due to their simplicity, high efficiency, and
This study proposes an innovative detection system for worm gear tooth pitch measurement using synchronous displacement sampling principles. The system
Abstract This paper addresses the challenges associated with the complex structure of the steering gear rocker shaft, particularly the low
Introduction Gear transmission systems are critical in automotive machinery, where spur gears play a pivotal role in transmission quality, power
The variable hyperbolic circular-arc-tooth-trace (VH-CATT) cylindrical gear exhibits exceptional load capacity, transmission efficiency, and stability, making it ideal for heavy-duty
Continuous advancements in mechanical processing demand higher precision in component manufacturing. High-precision equipment is essential for modern industrial production, where
Abstract:Gear milling machines play a pivotal role in the machinery industry of our country. In recent years, with the development
Spiral bevel gears serve as critical components in aviation transmission systems, including engine reducers, helicopter drivetrains, and mechanical subsystems. These
This study investigates the dynamic load characteristics of high contact ratio (HCR) spur gears through finite element analysis and coupled
The vibration characteristics of spur gear transmission systems with root cracks. An improved dynamic simulation method is proposed to account
Spiral bevel gears are critical components in applications such as industrial sewing machines, robotics, and precision machinery. This study investigates
Hypoid gears are critical components in automotive drive axles, operating under high-speed and heavy-load conditions. Their meshing performance is significantly
This study investigates the impact of structural parameters and fluid properties on the performance of cylindrical gear flowmeters using computational
Reverse gear engineering provides indispensable solutions for reconstructing complex mechanical components when original design parameters are unavailable. This approach is
