1. Maximum circumferential stress of ring gear in design specification Considering the influence of tooth parameters, load distortion of flexible wheel on load stress and dynamic load coefficient, as well as the influence of different wave generators, the design specification of harmonic gear estimates the maximum load stress of...
These documents do not consider the problem of over constraint and elastic deformation of the mechanism when analyzing the forces on the three ring reducer, and the model of meshing force is too simple, so it is quite different from the actual situation. Aiming at the problem of virtual...
The research on the dynamic characteristics of three ring reducer starts from the experiment. These experimental studies are mainly to apply excitation force to the three ring reducer to obtain its natural frequency, or to test the acceleration of the internal gear plate and the box and other relevant...
With the development of the research on three ring reducer, people begin to study its elastic dynamics. Without considering the influence of torque, inertia force of eccentric sleeve and the part outside the support at both ends of the input shaft, the input shaft is approximately regarded as a...