spiral bevel gear

The shaping process is forging, so that the blank is in good agreement with the ring rolling die, bite in

After the simulation, open the post-processing option in the DEFORM-3D main window to view the simulation results. The post-processing window

Determination of die wear and forming load test scheme determination of die wear and forming load test scheme aiming at

After the calculation of pre punching process is completed, enter the forming module of software pre-processing, add punching steps and

The metal material used in the blank simulation of driven spiral bevel gear is low carbon steel 20CrMnTi. The chemical

1. Modeling of gear tooth surface Importing the data of tooth surface points into UG can generate tooth surface pieces.

The tooth surface with good meshing performance is the basis for creating precision forging die. Therefore, the premise of using

The geometric dimension of the wheel blank is the basis for the design and processing of the spiral bevel gear

In order to verify the accuracy of machining parameter calculation, the ease off difference tooth surface is constructed for contact

The numerical differentiation method is used to calculate the numerical differentiation of the formula, calculate the main direction and main

According to the production principle of spiral bevel gear pinion, the coordinate system shown in the figure is established to

1. Large tooth surface of spiral bevel gear Σ2 production and its equation The double-sided hobbing method is generally used

After the sliding friction coefficient at the instantaneous meshing position of spiral bevel gear is solved by the formula, the

The point contact problem of conjugate surface of spiral bevel gear can be represented by the elliptical contact model shown

First, a limit tooling is added to the simple induction positioning tooling, that is, the welding limit bolt is used

In order to analyze the lubrication characteristics of spiral bevel gears, it is necessary to analyze the contact of spiral

The supplier has a solid-state heating equipment with a water temperature of ± 10.38 ~ 30 kHz and a water

By analyzing the vertical forging process, it can be found that there are three stages from the beginning to the

1. 3D model of equidistant spiral bevel gear According to the actual use and the characteristics of the gear, with

Considering the practical engineering application and the material library of Moldex3D simulation software, this paper uses alloy powder as metal

Use the measuring tool in dfeorm post processor to measure the dimensions of each part of the spiral bevel gear

After the end of the wedge section, the forming of the workpiece is coming to an end, and the parts