herringbone gear

When Abaqus is used to simulate the meshing stiffness of herringbone gear, the calculation accuracy is affected by the increased […]

In order to evaluate the accuracy of the model, the measured results of herringbone gear at 1000r · min ^ […]

Herringbone gear is composed of two helical gears with equal helix angle and opposite direction. If the tooth surfaces on […]

1. Closed power flow herringbone gear test bench Compared with the traditional open power flow test-bed, the closed power flow […]

According to the measured symmetry deviation, it can be known that in herringbone gear transmission system, the relative left rotation […]

The structure and material properties of two pairs of helical gears in herringbone gear are the same, but due to […]

According to the finite element simulation results of and axial displacement, the assembly offsets of 0.05 mm, 0.1 mm, 0.15 […]

As the force along the axis of gear meshing, the axial force determines the axial vibration of gear, and indirectly […]

When the herringbone gear pair with alignment error is meshed, the eccentric load on the tooth surface will have a […]

Based on the accuracy standard, combined with the structural constraints of large energy machinery and equipment and the requirements of […]

In order to verify the accuracy of the load contact analysis model of herringbone gear with centering error, a three-dimensional […]

Due to the limitation of manufacturing difficulty and production cost, it is difficult to improve the transmission stability by improving […]