Ring rolling process of cylindrical gear blank
Ring rolling, in fact, can be regarded as a rolling process, which mainly carries out continuous local compression deformation on […]
News
News
Noise reduction of planetary gear transmission system
Planetary gear train is an important gear transmission mechanism, which has the advantages of compact structure, small volume, light weight,
Scientific
Die forging process of driven spiral bevel gear blank of automobile rear axle
Die forging refers to the method of using die processing to make the blank finally form the forging. This forging
Scientific
Basic constraints of planetary gear train parameters
The number of teeth of planetary transmission cannot be selected at will. Normal transmission can be carried out only when
Scientific
Influence of deformation temperature on accuracy of spur gear
In actual production, the forming of workpiece is accompanied by heat generation, and the temperature of die and workpiece will
Scientific
Influence of carburizing process and equipment on gear deformation
1. Effect of temperature on gear deformation There is no doubt that with the increase of heating temperature and quenching
Scientific
Application of numerical simulation in cylindrical gear blank forming
The development of traditional cylindrical gear forming technology is a process through repeated tests by operators and years of experience
Scientific
Introduction of ring rolling technology for spiral bevel gear blank
Ring rolling process essentially belongs to plastic forming process. Through local deformation of spiral bevel gear blank, the overall forming
News
Coupling dynamic modeling of helical gear modification and friction excitation
Through the research on the relationship between helical gear modification and friction excitation, the coupling dynamic model of helical gear
Scientific
Numerical simulation of precision forging of spiral bevel gear and analysis of stress field distribution
By analyzing the stress distribution in the forming process of spiral bevel gear forgings, we can fully understand the stress
Scientific
Modeling and analysis of automobile steering gear rack
The rack is an involute gear whose base circle radius is infinite, and its contour has changed from involute to
Scientific
Optimization of design parameters of planetary gear train
According to the relevant models and parameters of the involute planetary gear reducer, as shown in Table 1. An accurate
News
Development of pre heat treatment of heavy truck gears
As we all know, the quality of gears is influenced not only by the steel itself, but also by the
News
Driven spiral bevel gear forging blank
As a transmission part, spiral bevel gear is widely used in automobile, machine tool, ship, aircraft and other related fields.
News
Development status of rack and pinion steering gear in China
Among the steering gears used by Chinese cars, in the last century, Jiefang automobile and Dongfeng Automobile used worm crank
Scientific
Influence of different sizing belt length on the accuracy of spur gear
The sizing belt of shaping die is one of the important process parameters affecting the forming accuracy of spur gear.
News
Influence of furnace charging mode on gear deformation
During gear heat treatment, carburizing and quenching, a reasonable furnace charging method shall be adopted according to the specific conditions
News
Parametric design of automotive rack and pinion steering gear
On the basis of studying a large number of relevant data at home and abroad, this paper makes an in-depth
Scientific
Heat treatment of automotive gear materials
The heat treatment strengthening technology of automobile gears should pay attention to the control of surface integrity, that is, to
News
Automotive rack and pinion steering gear system
The interface design of automobile rack and pinion steering gear model base the man-machine interface and man-machine interaction ability of
Scientific
Numerical simulation of precision forging of spiral bevel gear and analysis of strain field distribution
Strain is a physical quantity used to express the deformation size of the deformed body. Through the analysis of the
News
Research status of dynamic characteristics of helical gears in China and abroad
The dynamic response characteristics of gear system refer to the dynamic behavior of gear system in the working process, mainly
Scientific
Interference analysis and inspection of virtual assembly of automotive rack and pinion steering gear
Interference analysis is one of the important contents of virtual assembly design of automobile rack and pinion steering gear. After
Scientific
Overview of virtual assembly of automotive rack and pinion steering gear
Virtual assembly of automobile rack and pinion steering gear refers to that in the virtual environment, designers can easily establish
Scientific
Basic parameters of automobile steering gear
The basic parameters of automobile steering gear mainly include the number of teeth, modulus, pressure angle, tooth width, displacement coefficient
News
Parametric modeling of automotive rack and pinion steering gear parts
General products are composed of one or many parts. In order to realize the parametric design of products, we must
News
Experimental analysis on heat treatment of one speed gear
1. Microstructure analysis of pre heat treatment After ordinary normalizing, the metallographic structure of the first speed gear blank is
Scientific
Steel for heavy truck gears
Foreign tests have proved that the supercooled austenite decomposition products during surface quenching of carburized steel are the main reason
News
Situation of gear steel for heavy trucks in China
China’s truck gear steel basically follows the brand of the former Soviet Union. For a long time in the past,
News
Parameter optimization design of automotive rack and pinion steering gear
This paper introduces automobile steering system and automobile rack and pinion steering gear, then introduces the current situation of automobile
Scientific
Comparative test of influence of material hardenability on deformation of truck gear
1. Test purpose Our company adopts high-grade and high-quality zocrmntih steel with 6 bandwidths according to the steel factory standard.
Scientific
Truck gear processing technology
1. Introduction to truck gear processing The cold working routes of the three parts are basically the same: forging –
News
Development status of rack and pinion steering gear abroad
The steering gears commonly used in modern cars include recirculating ball steering gear, worm crank finger pin steering gear, rack
News
Metallurgical quality of steel for truck gear
The metallurgical quality of steel for truck gear has the following requirements: 1.End hardenability At present, the bandwidth control of
Scientific
Automobile rack and pinion steering gear
With the continuous development of the automobile industry, enterprises gradually adopt light and fuel-efficient front wheel drive vehicles to replace
News
Fracture failure analysis results of aluminum alloy automobile gears
After the above experimental analysis and referring to the metallographic inspection of Automobile Carburized Gears, it can be observed that
News
Effect of pre heat treatment on heat treatment deformation of cylindrical gear
The purpose of pre heat treatment is to obtain uniform and fine structure and completely eliminate stress. The pre heat
Scientific
Fracture failure inspection of aluminum alloy automobile gear
1. Analysis of fracture morphology of aluminum alloy automobile gear In order to analyze the fracture failure cause of aluminum
News
Deformation control of heavy truck cylindrical gear after heat treatment
Taking 9t one speed gear parts as an example, the effects of different pre heat treatment methods on the deformation
News
Fracture failure analysis of aluminum alloy automobile gear
Gear is an important part of automobile transmission device, which has the functions of changing movement direction, changing speed and
Scientific
Metal flow law of spur gear for truck under different shaping quantities
The tooth surface is reconstructed according to the numerical simulation results under different cold shaping methods. Compared with the other
Scientific
Basic research on heat treatment of automotive gear materials
Through gene analysis and basic performance experiment of automobile gear materials, it is very important to master the basic parameters
News
Research status of gear friction excitation in China and abroad
For the research of tooth surface friction, more attention is paid to the heating and energy consumption caused by friction,
News
Deformation analysis of truck gears before and after control hardenability strip steel
Three typical parts of heavy truck gearbox hc7s-120: first and second speed gear sleeve (representative of thin-walled castings), fourth speed
News
Influence of material quality on deformation of truck bevel gear
Material quality is affected by multiple factors. Different origin, smelting methods, quality categories and supply forms of truck bevel gear
News
Heat treatment process for controlling gear deformation
The process tests of 9T 34556 speed gear sleeve with different heat treatment methods, different heat treatment process parameters and
News
Development of precision forging technology of spiral bevel gear
In 1674, Danish astronomer Romer used the enveloping cycloid as the gear tooth profile to obtain the gear with conjugate
News
Pre heat treatment of gear blank of one speed gear
Through the process test of two different pre heat treatments on the deformation law of the parts after final carburizing
News
Selection of carburized gear steel for heavy truck
From the above analysis of the service conditions and failure forms of gears, it is proposed that the performance requirements
News
Effect of carburizing equipment and process on bevel gear deformation
1. Test purpose Verifying the rationality of bevel gear process is an effective guarantee to reduce the heat treatment deformation
Scientific
Comparative test on the influence of pre heat treatment on the deformation of helical cylindrical gear
1. Test purpose Verify the influence of different pre heat treatment methods on the deformation of final carburized helical cylindrical
News
Study on deformation of truck cylindrical gear
1. Effect of pre heat treatment on cylindrical gear deformation Before 2010, our company adopted the ordinary normalizing method for
News
Main factors affecting heat treatment gear deformation
Among the main factors affecting the gear heat treatment deformation, the only thing that can be improved by the heat
News
Development of surface strengthening technology for automotive helical gears
The automotive helical gear transmission system under various complex working conditions makes the surface strengthening technology of automotive helical gear
News
Heat treatment production of ZHY Gear truck gear
The gearbox gear of heavy truck is one of the three major products of ZHY Gear. It has been supporting
News
Influence of material quality on deformation of truck helical gear
The influence of material quality on the quality of truck helical gear has attracted more and more attention. The unstable
News
Effect of cold working on heat treatment deformation of helical gear
The machining method and residual stress of spiral gear will have a certain influence on the deformation of carburized spiral
News
Effect of forging on heat treatment deformation of cylindrical gear
Forging can make the forging billet segregation, uniform structure and reduce the banded structure, which is conducive to reducing the
Scientific
Metal flow law of spur gear for truck under different cold shaping modes
Figure 1 shows the equivalent stress distribution of spur gear under different cold shaping methods. During full tooth shaping, the
News
Influencing factors of heat treatment deformation of heavy truck gears
The deformation of heavy truck gearbox gear after carburizing and quenching is caused by the gear in the process of