spiral bevel gear

According to the analysis of spiral bevel gear tooth surface machining, based on the generation principle of spherical involute tooth […]

Because the tooth surface of spiral bevel gear is relatively complex, in order to ensure that the follow-up visual image

In order to ensure the quality of the experiment, this paper uses the contact area trace based on the concave

According to the cutting principle of spiral bevel gear tooth surface, whether it is left-hand spiral bevel gear tooth surface

Whether it is the outer edge milling cutter for machining concave tooth surface or the inner edge milling cutter for

The vibration acceleration amplitude and gear transmission error of the main gear bearing before and after optimization are simulated and

The key geometric dimensions of the milling edge of the new spiral bevel gear include: the top edge thickness L,

1. Shell stiffness optimization Re optimize the reinforcing rib on the main reducer housing. Adjust the thickness of the reinforcing

Because the tooth surface generating line of spherical involute spiral bevel gear is arc-shaped, and the generating line is used

The power of the whole vehicle is transmitted to the rear axle by the engine through the clutch, gearbox and

Taking the tooth surface generating line as the cutting edge, the complete tooth surface of spiral bevel gear with spherical

Taking the concave tooth surface of right-hand spiral bevel gear as an example, the generation principle of concave tooth surface

For spiral bevel gears with contracted teeth whose base cone, root cone, pitch cone and face cone apex coincide, the

In order to intuitively analyze the generation principle of convex tooth surface of right-hand spiral bevel gear, the method of

The type of spiral bevel gear studied is spherical involute involute involute involute spiral bevel gear with the intersection angle

When a pair of conjugate spiral bevel gears are driven, when the bevel gear with the number of teeth Z1

There are two main machining methods of spiral bevel gears, forming method and generating method. 1.Forming method The profile shape

The traditional spiral bevel gear machining is based on the principle of “imaginary flat top gear”. At present, the basic

The second-order error of logarithmic spiral bevel gear can be understood as the longitudinal and transverse drum shape error of

In the actual measurement of logarithmic spiral bevel gear, there is an offset in the measurement error. This offset can

Difference surface is a widely used surface error analysis tool. It was initially applied to the error discrimination of first-order

The tooth surface data point coordinates of logarithmic spiral bevel gear are collected by 3D laser scanner, and the tooth

The formation process of the tooth surface of the logarithmic spiral bevel gear can be regarded as that when the

There are many ways to express the tooth surface equation of logarithmic spiral bevel gear, including explicit, implicit, parameter and

Tooth surface reconstruction is the core part of the whole reverse engineering technology. The basic idea of logarithmic spiral bevel

Curve is the basis of building surface. In reverse engineering, the commonly used curve reconstruction method is to interpolate the

Spiral bevel gear modeling is determined by spiral bevel gear calculation software based on the basic parameters of the tooth

Theoretical tooth surface equation of spiral bevel gear pinion spiral bevel gear is processed on milling machine. The shaking table

As we all know, the tooth surface of spiral bevel gear is a very complex spatial surface. Using coordinate measuring

Spiral bevel gears have the advantages of stable transmission ratio, strong bearing capacity, low transmission noise and long service life,