bevel gear

The dual frequency induction quenching process of bevel gear includes electromagnetic induction heating process and quenching cooling process. The temperature […]

1. Design principle of gear induction coil The size of the gear module plays an almost decisive role in the […]

ANSYS software itself has powerful meshing function, so ANSYS software is used for meshing. Import the 3D model built in […]

In this paper, ANSYS software is used to dynamically simulate the dual frequency induction heating process of bevel gear, involving […]

The switching time of medium and high frequency current is involved in the time-sharing of dual frequency induction heating of […]

Before the double frequency induction heating experiment of bevel gear, it is necessary to build the experimental platform, process and […]

The double frequency heating experiment and numerical simulation of bevel gear are carried out with the determined process parameters. The […]

The experimental scheme of dual frequency induction heating of bevel gear is as follows: install the medium and high frequency […]

After induction heating, the bevel gear will be quenched and cooled. Different microstructure distribution can be obtained by using different […]

The dual frequency induction quenching process of bevel gear can be divided into induction heating process and quenching cooling process. […]

The current penetration heating depth is inversely proportional to the current frequency. Therefore, when the bevel gear induction heating mainly […]

As can be seen from Fig. 1a) and Fig. 1D), a more uniform temperature field model is obtained when the […]

The dual frequency induction heating process is applied to obtain a more uniform temperature field model of bevel gear. There […]

The dual frequency induction electromagnetic thermal coupling mode of bevel gear is analyzed, and the mode of alternating medium and […]

The most obvious feature of the induction heating process is the skin effect. When the penetration induction heating method is […]

The large modulus standard involute bevel gear with 12 modulus, 15 teeth, 20 º pressure angle and 40mm tooth width […]

The simulation model of electromagnetic induction heating of bevel gear includes bevel gear, induction coil and air. The numerical simulation […]

The bevel gear model is analyzed by finite element method. The grid size setting, physical parameters, boundary conditions and their […]

For a pair of bevel gears, to maintain pure rolling contact means that there is no relative sliding motion between […]

In order to consider the influence of torque on the dynamic response of central transmission bevel gear, keep the input […]

After the natural frequency and vibration mode of bevel gear are determined, the resonance speed diagram shown in the figure […]

In the process of EDM, the electrode will have a certain amount of burning loss, which will change the electrode […]

When rolling the thick cylinder of the pier, the relationship between the feed rate s per revolution and the average […]

The feed rate per revolution of the cone die is the reduction amount per revolution, which is the reduction amount […]

For the five kinds of swing head motion trajectories in the figure, they are analyzed one by one as follows: […]

The motion track of the swing head refers to the projection track of any point on the axis of the […]

Due to the eccentric load on the workpiece during rotary forging, the metal flow is uneven. If the preform is […]

The so-called “thick piece” revolving body means that the thickness h is greater than or equal to the radius R […]

The essence of swing rolling is a special two roll rolling. In the process of rotary forging, although the swing […]

The cold rotary forging precision forming process of bevel gear is an advanced manufacturing technology. Its process design in actual […]

Hypothetical generating wheel is usually used to explain the machining process of bevel gear. It is a virtual bevel gear […]

Based on the systematic theoretical and Experimental Research on the precision forming process of bevel gear cold rotary forging, the […]

In EDM, there is a discharge gap between the tooth profile of concave model cavity and electrode tooth profile δ。 […]

The calculation of rotary forging deformation force can provide a theoretical basis for selecting the tonnage of rotary forging machine. […]

Swing head inclination γ It refers to the included angle between the cone die axis and the fuselage axis. Swing […]

The preparation of bevel gear cold rotary forging preform needs three steps: forming, softening annealing and lubrication process design. 1) […]